80
Horizontal Pipe Deck Conveyor
Horizontal Pipe Shuttle
The Horizontal Pipe Deck Conveyor with stabbing support, extends
the operation of traditional horizontal pipe handling to a complete
operation which includes guidance of the pipe when lifting, and
accurate stabbing support of the pipe over mouse hole or well
center. The same mechanism supports the opposite operation
when laying down pipe.
The machine consists of a traditional pipe conveyor, equipped with
a telescopic tail - in/out, and stabbing support arm. The arm is
synchronized with the belt speed, and provides highly improved
operating performance to the horizontal pipe handling / guiding and
stabbing process.
The pipe deck conveyor is equipped with a feeding table for
simplifying loading and unloading with a pipe deck crane, and to
allow faster operating speed. Underneath the conveyor belt are
four solid rubber dampers, which prevent belt damage caused by
tool joints, pipe threads or other sharp edges, or heavy loaded
points.
The Horizontal Pipe Shuttle transfers drill pipe, collars and casing
between the pipe deck and the drill floor, and is especially suited
for applications with major elevations between the pipe deck and
the drill floor.
The machine consists of a horizontally slanted section, with a trol-
ley running on top. The trolley is equipped with a pushing device in
the rear end, and a set of hydraulic operated support arms in the
front section to secure the pipe in the trolley.
When fed with pipe on the pipe deck, the trolley climbs the slanted
section, and with the pushing device, the pipe is delivered to the
elevator pick-up position. All sections of this pipe shuttle are made
for harsh marine environmental and operational conditions.
Tail-in telescope speed:
25.98 in./sec
(660 mm/sec)
Drill Collar
Speed, belt:
25.98 in./sec
(660 mm/sec)
Tail-in telescope speed:
25.98 in./sec
(660 mm/sec)
Speed, belt:
25.98 in./sec
(660 mm/sec)
Drill pipe
Tail-in telescope:
20.35 ft.
(6.2 m)
(telescope retracted)
Length:
55.7 ft.
(17 m)
Total weight:
23,148 lbs.
(10,500kg.)
General
Hydraulic:
210 bar - 200 I/min
Power
Electrical:
110/230V - 50/60 Hz
Max. load:
7,716 lbs.
(3,500 kg)
Casing:
up to 20"
Drill collar:
up to 8"
Drill pipe:
Any size
Capacity
Tail-in telescope speed:
25.98 in./sec
(660 mm/sec)
Speed, belt:
25.98 in./sec
(660 mm/sec)
Casing
SPECIFICATIONS
Tail-in telescope speed:
25.98 in./sec
(660 mm/sec)
Drill Collar
Speed, belt:
25.98 in./sec
(660 mm/sec)
Tail-in telescope speed:
25.98 in./sec
(660 mm/sec)
Speed, belt:
25.98 in./sec
(660 mm/sec)
Drill pipe
Tail-in telescope:
20.35 ft.
(6.2 m)
(telescope retracted)
Length:
55.7 ft.
(17 m)
Total weight:
23,148 lbs.
(10,500kg.)
General
Hydraulic:
210 bar - 200 I/min
Power
Electrical:
110/230V - 50/60 Hz
Max. load:
7,716 lbs.
(3,500 kg)
Casing:
up to 20"
Drill collar:
up to 8"
Drill pipe:
Any size
Capacity
Tail-in telescope speed:
25.98 in./sec
(660 mm/sec)
Speed, belt:
25.98 in./sec
(660 mm/sec)
Casing
SPECIFICATIONS
