Solution Categories
More Ways to Browse
Contact NOV
PS-30 Power Slip
PS-30 Power Slip
Power Slips

Improves both safety and rig efficiency as proven with the FMS Flush Mounted Casing Slip.

Related Information

Installs Flush With the Drill Floor:

  • Improves both safety and rig efficiency as proven with the FMS Flush Mounted Casing Slip.
  • Eliminates work platforms for stabbing and operating power tongs during casing running operation

Power Down Slips:

  • Reacts up to 45,000 ft/lbs of torque, on 14" casing with sufficient string weight.

Insert Carriers Make This a Universal Tool, Not Just Another Power Slip:

  • Allows the PS 330 to handle all pipe types and sizes, including BHA's, collars, drill pipe, casing and tubing from 2 3/8" to 20".
  • Quick changeover from BHA's to collars to drill pipe allows the PS 30 to trip the entire string.
  • Insert carriers can be changed with pipe in the hole.
  • Carrier change can be done in 5 minutes or less.
  • Special drop and lock, pull and release design eliminates loose pieces such as bolts and pins.
  • The PS 30 can be fitted with insert bowls should it become necessary to use hand slips.

Like the Insert Carriers, the Slips Also Have a Rapid Change System:

  • Two handles on the middle slip segment retract and lock the springloaded slip retaining pin.
  • No loose parts.

Centering Device:

  • The PS 30 is standard equipped with a centering device incorporated in the top cover.

Slip Set-back Designed to Pass Tool Joints, BHA's and Casing Centralizers:

  • The slip set back allows tool joints and drill pipe protectors to pass without dragging on the inserts, even when drilling with 6 5/8" drill pipe.
  • The PS 30 will pass: BHA's when tripping; Centralizers when running casing.

Control Panel:

  • A control panel, which can be located in the driller's console, enables the driller to operate the slips