Fiberspar LinePipe is a Spoolable product (LPS) that consists of an inner thermoplastic pressure barrier that is reinforced by high strength glass fibers embedded in an epoxy matrix. LPS is intended for corrosive gathering and injection applications including general and sour produced fluids and gases. LPS is available with high density polyethylene or high temperature polyethylene pressure barriers with temperature ratings to 140 deg F, 180 deg F and 203 deg F.
Smarter Design, Expanded Solutions
Fiberspar Product Data Sheet
Fiberspar LinePipe is a Spoolable product (LPS) that consists of an inner thermoplastic pressure barrier that is reinforced by high strength glass fibers embedded in an epoxy matrix. LPS is intended for corrosive gathering and injection applications including general and sour produced fluids and gases. LPS is available with high density polyethylene or high temperature polyethylene pressure barriers with temperature ratings to 140 deg F and 180 deg F and 203 deg F.
Pipe is supplied in continuous lengths up to 9000 ft. (2740 m) and is supplied on reels for rapid installation in most applications. Wear-resistant exterior layer provides excellent damage resistance during handling and installation. Connectors are designed to grip GRE structure, avoiding issues related to viscoelastic creep associated with thermoplastic materials. Connectors available in all standard configurations (flanged, threaded, weld-end, etc.) or custom connections can be supplied.
Our products are designed with Service Factors for Water, Oil and Gas in full compliance with API RP 15S, API 15HR and CZA Z662. Fiberspar is the first spoolable offering to comply with all three standards.
- Culture of Excellence in Manufacturing, Innovation and Quality Control
- Lower Installation and Operating Cost Pipeline System
- Clear Technical Advantage Over Alternative Composite Products
- Engineered to Consistently Lower Costs and Save Time in Open-Ditch Installations
- Choose Fiberspar for Every Remediation Project
Our new XT product line offers you the highest temperature rating available in the spoolable line pipe market, up to 203°F (95°C)
You can now grow your use of spoolable line pipe with our expanded pressure ratings up to 3,500 psi.
We offer you the largest selection of size and flow rate capabilities of any spoolable line available, allowing precise, straight forward selection of the needed product, avoiding unnecessary extra cost for over-designed or the dangers of underdesigned piping systems.
We are consolidating all inside diameters for a given size to the same dimension, regardless of pressure ratings. We are also identifying the nominal diameter by the ID to be more aligned with Industry standards.
Temperature rated from -29 deg F to 140 deg F, 180 deg F and 203 deg F continuous operation. Operating pressures 500 to 3500 psi. 21 international patents awarded. Wear resistant exterior layer along with unique bonding layer between thermoplastic pressure barrier (internal liner) and true GRE structure. Pipe is supplied on reels to provide extended length between connection sites (minimal number of joints).
Fiberspar Frequently Asked Questions
Size Range:2" -
Pressure Ratings:500 to 3500 psi Pipe Construction:Continuous Single-Angle Filament Wound with Anhydride cured Epoxy structure.
Exterior jacket layer included. Temperature Range:-29 deg F - 203 deg F (-34 deg C -95 deg C)Joining Method:Mechanical - Flanged, Threaded or Custom Fittings:Not
Applicable/Corrosion Resistance Metallic as needed. Chemical Service:All general services except solvents and aromatics.
Contact us for all your piping solutions
Fiber Glass Systems