The BOP’s are well control components used during a well intervention.  There are two sets of sealing rams. One will seal when coil tubing is in the well (pipe ram, tubing ram).  The other ram is a blind ram that will seal when there is no tubing in the well.  In addition there are two other sets of rams.  The first being a shear ram that will cut the coil tubing and/or wireline.  The other set of rams is a set of slip rams that will grab and hold the coil tubing.  The two sealing rams are required for well control and the other two are designed so well control can be performed.

The ES BOP is designed to be smaller and lighter than any other comparable BOP.  It features a hydraulic ram change that enables easier access to service the rams.  It has a balanced piston on the shear actuator that removes the effects of well pressure when shearing.  It has internal hydraulic porting and ram position indicators.  It is available in a wide variety of configurations. 

• Applications:
  Any Coiled Tubing Application