• Lifting Frame Mandrel

    Description

    The adaptor mandrel is a pressure containing crossover fitted to the top of the subsea riser. It transfers the load from the riser to the coiled tubing lift frame. The adaptor mandrels are used to reduce the rig up height required in the derrick.

    Specifications

     AMA25AAMA25BAMA35AAMA35BLFA50A12A03
    Lifting Frame250 ton250 ton350 ton350 ton500 ton
    Top Connection 13”-4 ACME Box (Bowen)11.5”- 4 ACME Quick unionBowen10”- 4SA – 2G (Box)7 1/16” 15K BX156 Flange
    Bottom Conection10”- 4 Stub ACME Pin (Expro)10”- 4 Stub ACME Pin (Expro)10 1/8” - 4 ACME 2G Pin10”- 4SA – 2G (Pin)13.5" - 4 ACME 2G Pin
    Internal Bore Diameter7.38”7.06”7.38”  
    Overall Dimension (Transportation)OD: 25”, L: 44.10”OD: 22”, L: 53.25”OD: 22”,  L: 49.66”OD: 25.98”,  L: 65.10”OD: 24”,  L: 70”
    ServiceH2S ServiceH2S ServiceH2S Service  
    Working Pressure10,000 psi10,000 psi10,000 psi10,000 psi10,000 psi
    Pressure Test15,000 psi @ 0 lbs15,000 psi @ 0 lbs15,000 psi @ 0 lbs15,000 psi @ 0 lbs15,000 psi @ 0 lbs
    Load Test375 MT @ 0 psi375 MT @ 0 psi525 MT @ 0 psi525 MT @ 0 psi750 MT @ 0 psi
    Simultaneous Load & Pressure Test250 MT @ 10,000 psi250 MT @ 10,000 psi350 MT @ 10,000 psi350 MT @ 10,000psi500 MT @ 10,000psi
    Additional itemsThread protector for 13”- 4 ACME Box; Thread protector for 10”- 4 Stub ACME PinThread protector for 11.5”-4 ACME Box; Thread protector for 10”- 4 Stub ACME Pin ¼” NPT port pressure test plug; ¼” NPT port pull test fixture¼” NPT port pressure test plug; ¼” NPT port pull test fixture