• 2000 Single Ram BOP


    We provide an extensive offering of blowout preventers for well control and monitoring for high pressure applications with various ram options.


    • Taper threaded end caps with blow-out proof ram screw
    • Reinforced ram block reduces extrusion
    • Higher working pressure than 150H
    • Full opening
    • 2"" thru 3"" EUE thread connections
      (3"" EUE is 3.5"" OD 8RD EUE)
    • Optional NACE trim
    • Optional low temperature carbon steel (200 PS Model)
    • Carbon steel models available with welded flanges in API
    • Flanged x Flanged or Flanged x Threaded (200 PF Model)


    Sizes Available2"2 ½"3"
    Vertical bore2.120"2.440" 3.000"
    Working pressure2,500 psi
    Body and cap materialDuctile Iron*, Carbon Steel
    Ram screw and packing glandAlloy Steel
    Ram size optionsBlind, ⅝"-1", 1 ⅛", 1 ¼", 1 ½", 1 ¾"
    Ram screw packingNBR, HSN and FKM
    ConnectionMale x Female Thread or Flange
    Optional flange connections2 1/16" 2000, 2 9/16" 2000, 3 ⅛" 2000***
    Weight52 lbs
    Width (rams open)26"

    Note: 150H and 200P rams are not interchangeable. Also they are "directional" due to the internal reinforcement plate.
    Always install with "THIS SIDE UP" sticker facing up.
    *Corrosion resistant materials and coatings available, contact customer service.
    **NACE stainless steel optional
    ***Other flange sizes available

    Ram Materials
    Maximum temperature250°F (121°C)300°F (149°C)325°F (163°C)400°F (204°C)450°F (232°C)
    Maximum H2S2%2%10%20%35%
    Maximum CO2NR10%20%5%15%

    Note: Above temperatures are suggested maximum short-term ratings and should not be considered as a "continuous operating temperature. Always install with yellow "THIS SIDE UP" lettering facing up to minimize extrusion under pressure