2000 Single-Ram BOP

Monitor high-pressure applications and achieve greater well control with our blowout preventers.

  • Description Description
  • Ruler Specifications
Description

We provide an extensive portfolio of blowout preventers for well control and monitoring high-pressure applications with various ram options.

Features/Benefits

  • Taper-threaded end caps with blowout-proof ram screw
  • Reinforced ram block reduces extrusion
  • Higher working pressure than 150H
  • Full opening
  • 2" through 3" EUE thread connections
  • (3" EUE is 3.5" OD 8RD EUE)
  • Optional NACE trim
  • Optional low-temperature carbon steel (200 PS model)
  • Carbon steel models available with welded flanges in API
  • Flanged × flanged or flanged × threaded (200 PF model)
 
Specifications

2000 Single Ram BOP Specifications

Sizes available

2 in.

2.5 in.

3 in.

Vertical bore

2.120 in.

2.440 in.

3.000 in.

Working pressure

2,500 psi

Body and cap material

Ductile iron*, carbon steel

Ram screw and packing gland

Alloy steel

Ram size options

Blind, ⅝"-1", 1.125", 1.250", 1.500", 1.750"

Ram screw packing

NBR, HSN, and FKM

Connection

Male × female thread or flange

Optional flange connections

2.5625 in. 2000, 2.5625 in. 2000, 3.1250 in. 2000***

Height

10 in.

Weight

52 lb

Width (rams open)

26 in.

Handles

Optional

Note: 150H and 200P rams are not interchangeable. Additionally, they are "directional" due to the internal reinforcement plate.
Always install with "THIS SIDE UP" sticker facing up.
*Corrosion-resistant materials and coatings are available; contact customer service.
**NACE stainless steel optional
***Other flange sizes available

 

 

 

Raw Materials

 

NBR

Compound C

HSN

FKM

AFLAS

Maximum temperature

250 °F (121 °C)

300 °F (149 °C)

325 °F (163 °C)

400 °F (204 °C)

450 °F (232 °C)

Maximum H2S

2%

2%

10%

20%

35%

Maximum CO2

NR

10%

20%

5%

15%

Note: Above temperatures are suggested maximum short-term ratings and should not be considered as a continuous operating temperature. Always install with yellow "THIS SIDE UP" lettering facing up to minimize extrusion under pressure.

Contact Us