Side view of a Wilco Acid Transport Trailer

Acid Transport Trailer

Our Wilco acid transport trailers are currently available with steel fiber-reinforced polymer (FRP) barrel units with FRP lining or Tnemec 391 lining design.

 

  • Description Description
  • Ruler Specifications
  • Resources Resources
Description
We custom-engineer our trailers to fit your operational needs and specifications.
Specifications

Acid Transport Trailer Specifications

FRP 5,000-gallon
Tank(s) Meets ASME Sec VIII, Div 1 Meets ASME Sec VIII, Div 1
Shell and heads Material ⅝-in. FRP
Manways Hawk FRP or Wilco Clay and Bailey
Vents DOT-approved vents for each compartment DOT-approved vents for each compartment
Recirculation manifold 3-in. remote control butterfly valves 3-in. penetrations in tank for addition of recirculation manifold
Discharge manifold 4 in., with acid-resistant hose 4-in. nominal UHMW PE tubing with 4-in. nominal UHMW PE tees
Discharge valves from unit manifold 4-in. manual valves 4-in. manual valves
Discharge valves from individual tank compartments 4-in. air actuated butterfly valves at exit for each compartment 4-in. air actuated butterfly valves at exit for each compartment
Discharge and recirculation manifold All steel components are lined. All components are UHMW PE
Discharge and recirculation manifold ends 4-in. male unions per customer spec 4-in. female unions
Recirculation line along top 3 in.
Catch basin Located at rear of unit. Used to collect any fluids from hose rack and pipe ends. 5-gallon capacity. Located at rear of unit. Used to collect any fluids from hose rack and pipe ends. 5-gallon capacity.
DOT overturn protection Tombstones Tombstones
Trailer DOT 412MS DOT 412MS
Ladder Located on roadside Located on roadside
Walkway Walkway with fiberglass grating, handrails, and OSHA-approved safety gate On roadside with fiberglass grating, handrails, and OSHA-approved safety gate
Hose tray 28-ft fiberglass hose tray with grating and drain 28-ft fiberglass hose tray with grating and drain
Paint Epoxy primer coat and polyurethane top coat (customer choice of colors) Shot blasted with epoxy primer coat and polyurethane top coat (customer choice of colors)
Placards DOT placards as required DOT placards as required
Controls Air controls for discharge and recirculation lines, including emergency kill switch located on front driver’s side on trailer Air controls for discharge, including emergency kill switch located on both sides of trailer
Volume 5,000 gallons available in two, three, or four compartments 5,000 gallons, two compartment shells
F&D heads: Material ¼-in. SA-36
Width 96 in. 98 in.
Overall length 37.5 ft
Length, kingpin to rear bumper 40 ft 2 in. 34 ft 5 in.
Suspension Two axles, 25-kip Neway Air Ride with ABS Two axles, 25-kip Hutch leaf spring with ABS or Air Ride suspension with ABS
Tires Eight 11R 22.5 radial tires on unimount wheels Four 445/50R22.5 Michelin super single tires with 22.5×14.0 steel wheels
Landing gear Holland trailer landing gear with self-leveling foot Holland trailer landing gear with self-leveling foot
Kingpin 2- or 3-in. welded or bolted kingpin assembly 2-in. welded kingpin assembly
Fenders ⅛-in. steel or FRP available 14-gauge steel
Resources
  • Wilco Acid Transport Trailer: 5,000-gallon capacity Data Sheet
  • Wilco Acid Transport Trailer: Fiber-reinforced polymer (FRP) Data Sheet
  • Wilco Capabilities and Services Brochure
Wilco Acid Transport Trailer with Fiber-reinforced polymer

Contact Us