The NP-1000 triplex high-pressure pump was specifically designed to deliver high flow rates at high pressure while providing exceptional low flow rate turndown.
This pump is the result of necessary product advancements. This new design approach uses low-friction roller bearings rather than journal bearings to significantly enhance durability—particularly at low speeds at which other pumps using journal bearings are most vulnerable. This design also operates at a much cooler temperature. This means less lube oil system requirements, which saves weight without sacrificing unit durability.
This pump is internally balanced so that an externally mounted counter balance does not compromise the reliability of the unit. This enhancement also provides a much smoother pump by balancing each cylinder rather than compensating from the end of the shaft. Maximum rod load is increased to 73,500 lb (versus 58,000 lb for competitive offerings). This enables nearly 27% increased working pressure without changing to smaller cold ends.
The pump will accept existing cold ends and increase their capabilities.
NP-1000 Liquid Nitrogen Triplex Pump Specifications
|Cold-end diameter||2 in. (5.8 cm)||2.5 in. (6.35 cm)||2.875 in. (7.303 cm)||3 in. (7.62 cm)||3.25 in. (8.255 cm)|
|Number of pistons||3|
|Stroke length||2.25 in. (5.72 cm)|
|Weight without cold ends and lube oil||2,550 in. (1,156.7 cm)|
|Length||37.25 in. (94.62 cm)|
|Width||40.5 in. (102.87 cm)|
|Height||21.94 in. (55.73 cm)|
|Operation characteristics at 90% volumetric|
|Maximum flow||74 gal/min (281 L/min)||116 gal/min (440 L/min)||153 gal/min (581 L/min)||167 gal/min (633 L/min)||196 gal/min (743 L/min)|
|Maximum flow||415,000 SCFH (11 700 m3/hr)||649,000 SCFH (18 400 m3/hr)||858,000 SCFH (24 300 m3/hr)||935,000 SCFH (26 500 m3/hr)||1,097,000 SCFH (31 000 m3/hr)|
|Maximum pressure||15,000 psi (103 MPa)||15,000 psi (103 MPa)||11,200 psi (77 MPa)||10,000 psi (69 MPa)||8,000 psi (61 MPa)|